For swimming pool underwater light, we have three kinds: halogen, LED, also RGB
Brand:
Finn ForstItem NO.:
PLP-003Order(MOQ):
1 PiecePayment:
T/T, L/C, Paypal, Cash, etc.Product Origin:
ChinaShipping Port:
Guangzhou or ShenzhenLead Time:
Normally 7-15 working days after deposit or accordinglyMaterial:
ABS+UVApplication:
Swimming Pool, Fountain, Pond
2.Specification of swimming pool LED light
Model | PLP-003 |
Matterial | ABS+UV |
Light source & power | Halogen lamp beads 100-150W |
Small power LED 144 Lamps 10W | |
Small power LED 252 Lamps 18W | |
Small power LED 324 Lamps 24W | |
Working voltage | AC 12V |
Installation | Wall mounted |
Color | Colorful,warm white,cool white or signle color |
Application | Swimming pool |
Waterproof standard | IP68 |
Life time | 50000hours |
3.Features and advantages
Small volume
LED basically is a very small chip is encapsulated in epoxy resin, so it is very small, very light.
Long service life
In the appropriate current and voltage, the LED service life up to 50000 hours,
high brightness, low heat.
Environmental protection
LED is made of nontoxic materials make, unlike fluorescent lamps containing mercury will cause pollution, at the same time, LED can also be recycled.
Durable
LED is completely encapsulated in epoxy resin, it than the bulbs and fluorescent tubes are strong. The lamp body has no loose parts, these features make the LED can say is not easy to damage.
Easy installation
Easily installed into standard fixture.
Application
Use as under water lighting for swimming pool, fish ponds, fountains, water lighting features etc.This LED underwater light can be designed into multi colors.
Colour Choose
The colour can be changable which has 7 different colours or pure colour .But if you request pure colour,we also can design for you .
4.Swimming pool LED light installation instruction
1). Light should be set 30-40cm below the water level;
2). The outlet for the conduit should be positioned so as not to interfere with the mounting ring in any way.
3). Set conduit in wall before concrete is sprayed.
4). Render or Marblesheen mounting ring into wall;
5). Ensure that the outer face of mounting ring is flush with the finished pebble surface;
6). Transformer needs to be installed in an easily accessible area to allow for servicing when requiry.
Attention: If you connected the lamps on the wall under the swimming pool,or on anywhere,pls use one suitable transformer to transfer the voltage to 12V.If not,it is really dangerous